Except changing filters and membrane, you also need to sanitize, replace, upgrade and maintain other parts and accessories of your Reverse Osmosis system. This helps to keep your reverse osmosis system up and running smoothly. We have prepared a list of ro spare parts for Standard Reverse osmosis System.
These Reverse Osmosis parts and accessories includes Connectors, tank pressure shut off switch, filter wrench, refrigerator ice maker kit, automatic shut-off valve, check valve, flow restrictor, O-rings set, RO Tank, RO Faucet, RO pump, TDS meter, RO pressure gauge, filter clip, tubing, mounting bracket, screw, drain adapters and clips
ro spare parts for Standard Reverse osmosis System
In RO system amount of water that has contaminant is wasted. The drain pipe is used to flush out contaminated water in the system.
Helps to tighten, remove and loosen the housings
Watts WR-100 Filter Housing Wrench- https://amzn.to/2IEq52R
iSpring AWR2 Reverse Osmosis Pre-filter Housing Canister Wrench- https://amzn.to/2s0vytI
APEC Membrane Housing Wrench For Reverse Osmosis Water Filter System (WRENCH-MEM)- https://amzn.to/2s0vYjS
TmallTech 10″ inch Reverse Osmosis Water Filter Canister Housing Wrench RO Filter Housing- https://amzn.to/2IVD2J2
Pentek SW-2 Standard Housing Wrench- https://amzn.to/2IycPk9
It is made of plastic to prevent corrosion
iSpring ORBX2 O-Ring for Big Blue Water Filter Housing (2 Pack)
The O-ring fits 10 inches and 20-inch big blue water filter housing
It is leak proof guarantee and builds to last long.
They ensure filter housings don’t leak. O-ring need to be changed regularly mostly when you are replacing cartridges
iSpring ORFX3 O-Ring for 10″ Water Filter Housing Sump O-ring (Set of 3)
This O-ring is ideal for 10-inch water filter housings, pre-filter housing for RO systems, counter top water filter and whole house water filters
It comes with a set 0f three and has a diameter of 31/2 inch O.D
APEC O-Ring Set for 3.5″ Diameter Reverse Osmosis Water Filter Housings (3 Pack O-RING-SET)
A set comes with a pack of three and has a diameter of 3.5-inch O.D
If you are looking for O-Ring that fits standard filter housings of APEC ultimate RO systems and essence RO systems, APEC O-Ring will serve you best.
Automatic shut off valve
It is mostly used in under sink Reverse Osmosis system. Shut off valve stop flow of water back into the unit, when the storage tank is full.
Aquaboon Automatic Shut-Off Valve with Quick-Connect Fittings For RO Reverse Osmosis
It is made using NSF compliant material and comes quick connect fittings for reverse osmosis
DIGITEN 1/4″ Automatic Shut-Off Valve with Quick-Connect Fittings For RO Reverse Osmosis(Pack of 2)
The package has pack of two four shut-off valve
Turn off water supply when the tank pressure reaches 65% of the supply water pressure
Purenex ASOV Auto Shut Off Valve, 1-Pack
Shut off the feed water entering the RO unit when the tank pressure reaches 2/3 of the feed water pressure
Malida Automatic Shut Off Valve with 1/4 Inch Tube Quick Connect Fittings For RO Reverse Osmosis
Malida comes with quick connect fitting.
The tube connections are ¼ inch with “in” and “out” labeled on the top
It allows water to flow forward not backward. Prevent water from flowing back to the RO membrane. Every unit has at least one, but you need two for best unit
Malida 1/4″ Quick Connect Check Valve for RO Pure Water Reverse Osmosis System
The check valve fits all under sink water filter systems
It is a ¼ inch quick connect check valve
Made of POM material
TmallTech 1/8″ Thread Male to 1/4″ Tube Elbow Check Valve for RO Reverse Osmosis (Pack of 2)
TmallTech check valve is 1/8 inch thread male to ¼ -inch tube elbow check valve
JOHN GUEST 1/4″ One Way Check Valve RO Reverse Osmosis Water Filter NSF Certified
John Guest 3/8″ One Way Check Valve RO Reverse Osmosis Water Filter NSF Certified
Flow restrictor regulates amount of water that flows to drain. Ensures filtered water does not go in the drain pipe.
TmallTech 50GPD Flow Restrictor 300CC 1/4″ Quick Connect for RO Reverse Osmosis (Pack of 2)
It is a 50GPD restrictor 300CC
Abundant flow water 50 GPD Flow Restrictor 1/4″ Quick Connect – H-R2065QC
Inline flow restrictor for RO system
To be used on system utilize a 50 GPD membrane element and is 420 ml size.
RO Storage Tank
Storage tank is where filtered water is stored waiting to be transported to its point of use. Storage tank comes in different sizes and this depends with amount of water your family consumes
Express Water RO132-TNK 4.0 gal Reverse Osmosis RO Water Storage Tank by TANKRO, White
The tank pre-charge about 5-7 psi
Express tank is manufactured using finest FDA best material such as stainless steel, polypropylene, and butyl rubber.
The tank is 4 gallon and holds 3.2 gallons of water.
iSpring T32M 3.2 Gallon Pressurized Storage Tank for Reverse Osmosis (RO) Systems
The tank size is 3.2 gallons and designed for reverse osmosis application
To guarantee safety, the tank is constructed using stainless steel, food grade material, and FDA compliant material. It is NSF approved.
6.0 Gallon (5.5 Draw-down) Reverse Osmosis RO Water Storage Tank by PA-E
To ensure you are consuming standard water the tank is manufactured using FDA compliant material and food grade material. It is NSF approved
The tank size is 6 gallons and 5.5 drawn down
Purenex PRO 3.2 Reverse Osmosis Water Storage Pressure Tank
To make sure the tank is safe for human use it is certified by NSF and CE. It is also made of FDA approved bladder, food grade, no rubber smell, no plastic smell, stainless steel connection on top
The tank is 4 gallons and holds 3.2 gallons of water
It is pre-charge with the 5-7Psi pressure of air.
It adds pressure needed to perform treatment function and help to move treated water from storage tank to the point of use such as faucet
There are two types of pump use in reverse osmosis system
Booster pump-raise water pressure as it enters the RO unit
Delivery or demand pump – move filtered water from storage tank to the appliance such as faucet, refrigerator, and ice maker.
In the market, there is an electric pump and permeate pump.
Electric pump requires electricity to operate while permeate pump uses water pressure to increase pressure needed.
Permeate pump not only saves energy it reduces the water required to flush membrane. For instance, instead of using four gallons to produce one gallon of water, RO system using permeate pump waste one gallon to produce one gallon of filtered water. You need two gallons of contaminated water to produce one gallon of pure water.
Aquatec AQUATEC-ERP-1000 Permeate Pump
Looking for energy saving device, AQUATEC-ERP-1000 Permeate is a non-electric pump. It utilizes turbine pump that uses the pressure of the waste water to pump clean water into the storage tank.
The AQUATEC pump increases product tank pressure and decreases waste water by up to 50%.
The pump comes with installation instruction, utilize ¼ inch quick connect fittings thus makes easy to install
It is adequate for low-pressure application and inlet water pressure for as low as 30 psi
Other types of AQUATEC PUMP
Aquatec ERP-500 Permeate Pump for up to 50 GPD
Aquatec CDP 8800 water booster pump + Transformer 115V 1/4 & 3/8
Watts Premier 560043 Water Filtration Booster Pump Kit
The best thing about this pump comes with everything needed to connect to your water filtration system.
Transformer is 110v
RO pressure gauge
Gauge test your home water pressure.
Express Water Quick Connect Water Pressure Gauge 160 PSI Parts Fittings Connection for Water Filters / Reverse Osmosis RO Systems
Express water pressure gauge has a maximum working pressure of 160 Psi
Best in determining incoming pressure of the reverse osmosis system
In the package has female adapter and ¼ inch quick connect stem
It is made of BPA-free plastic and leads free connections.
DIGITEN Water Pressure Gauge Meter 0-1.6MPa 0-220psi 1/4″ f Reverse Osmosis System Pump
It has a pressure range of 0-220 Psi
The pressure gauge is connected to the inlet of RO membrane
Features ¼ inch quick connects fittings, connector material is PE and gauges material is stainless steel.
Tier1 Reverse Osmosis revolution Tank Pressure Gauge
Check air pressure of the RO water tank
Other fittings and accessories
TmallTech Big/Small Double Clip Clamp 2.0″x 2.5″ Bracket Reverse Osmosis RO Housing (Pack of 3)
It is big or small 2.0″x2.5″ Double Clip for RO mounting
Reverse osmosis revolution Large/Large 2.5″x2.5″ Reverse Osmosis RO Clips (set of 2), hold membrane housing & 2.5″ diameter filter or 2 membranes
This clip contains membrane housing, two membranes together and 2.5-inch diameter filter.
Tank pressure shut off switch
AquaTec Tank Pressure Shut-off Switch 80 psi 1/4″ Quick Connect RO Reverse Osmosis
It is shut off switch for AQUQTEC booster pump
AFWFilter Tank Shutoff (TSO) Switch for Aquatec Booster Pumps
Mounting Bracket, Screw, and clips
Screw helps to mount filter housing to the bracket and holds a membrane clips. Some set comes with only screws to mount housing without a membrane clips when buying check on that.
Refrigerator/ ice maker connecting kit
It is used to connect filtered water output from RO system to your ice maker, coffee maker, or refrigerator.
iSpring Fridge Connection and Ice Maker Kit for Reverse Osmosis Water Systems, 20ft 1/4″ Tubing with 1/4″ Push-In and Compression Fittings – ICEK
APEC Water Systems ICEMAKER-KIT-RO-1-4 Ice Maker Kit for Reverse Osmosis Systems, Refrigerator & Water Filters
TDS meter test and monitor quality of your water regarding total dissolved solid (TDS).
If you didn’t find what you wanted in our ro spare parts for Standard Reverse osmosis System or you just want to know the reverse osmosis part that fits your system. Please feel free to contact us in the comment section, and our team of expert will guide you accordingly.