The Water Pressure gauge help monitor incoming water pressure in your home.
It is mounted directly on your home’s incoming water line and is available in a wide variety of pressure ranges from 60 psi to 1,500 psi that fits most water treatment systems.
Water pressure gauge comparisons
Water pressure gauge application
- Reverse osmosis system
Pressure is one of the important things for your reverse osmosis system to work properly. The reverse osmosis membrane requires a minimum of 50 psi to operate efficiently.
To know the exact water pressure incoming to your RO membrane you need to test it using a reverse osmosis pressure gauge.
In the RO membrane, the pressure gauge is designed to check the pressure being fed to the membrane. It is installed before the RO membrane.
- Filter unit
It is installed between your house’s incoming water and the filter unit.
Most water filtration systems, except the RO membrane, do not require a pressure gauge. Also installed after the filter system, this way you can tell if filters need changing.
- Tap water: The gauge is installed on your home’s incoming water line.
- Groundwater: If you are using well water, you can install a gauge on your well to test the pressure.
How to install a pressure gauge
Water pressure gauge for home reviews
Reverse osmosis pressure gauge
Specification
- Range: 0–220 PSI
- Material: Stainless Steel and Polyethylene (PE)
- Gauge Connection Type: 1/4” quick connect
DIGITEN monitors pressure at a range of 0–1.6 MPa or 0–220 PSI.
The gauge material is stainless steel, and the connecter is PE.
It is easy to install. It comes with a gauge, a 1/4 thread x 1/4 tube connector, a Tee, and a 2″ tube.
Use it to monitor the post RO water pressure.
DIGITEN 3/8″ Meter 0-1.6MPa 0-220psi for Reverse Osmosis System Pump
The gauge has a standard 1/4 inch connection and it comes with a 1/4-to-3/8 tee fitting.
Specification
- Size: 23/8” x 2”
- Range: 0-160 PSI
- Material: Stainless Steel, EPDM O-Rings, Food Grade Polypropylene
- Gauge Connection Type: ¼” quick connect compatible stem
- T Adapter Connection: 2 x 1/4” quick connect fittings, 1 x 1/4” quick connect compatible stem
- Temperature: 33°F–140°F
Express monitors pressure at a range of 0–160 psi.
It fits standard 1/4” quick connect outlets.
Use this gauge to monitor the pressure in reverse osmosis systems, ATO, coffee machines, water filtration systems, ice makers, refrigerator kits, and purifiers.
Water pressure gauge 3/4
Specification
- Range: 200 psi
- Connection: 3/4-Inch
Watts 0950200 DP IWTG works with a maximum pressure of 200 psi.
It fits a 3/4-inch female garden hose thread.
The Flow Doctor comes with five adapters so you can measure in multiple possible settings and locations. The five adapters include:
- Quick Connect Adapter for Snap Fit quick-release systems to monitor water hoses, sprinkler systems, irrigation, garden hose tools, watering devices (guns and wands), and spray nozzles.
- Special 1/2″ ADAPTER: all-purpose 1/2″ Standard Pipe Adapter for testing threaded houses, buildings, showers, water tanks, hot water heaters, pumps, boosters, wells, boilers, RV water, waterers, sprinkler irrigation systems, or bathtubs, piping outlets, and supply lines.
- Unique Stop Valve Adapter: used to measure sinks, toilets, basins, dishwashers, and angle valves.
- Two Tubin Adapters (1/4″ and 3/8”): for outlets that feed the refrigerator water filter, aquarium, ice maker, drinking water purifier filters, water treatment, drinking water fountain, RV filter, plant watering system, drip irrigation tubing, PC cooler, needle valve, and tubular connection.
This gauge monitors the pressure in a range of 0–200 psi.
It is made of a black steel case with a 3/4 inch GHT copper hose attachment threaded over 1/8 NPT to gauge the stem.
MICTUNING is set at 45 psi by screwer, but you can adjust the setting from 0-160 psi.
The gauge is made of stainless steel with an explosion-proof plug. An explosion-proof plug helps in case water pressure exceeds the capacity. It prevents water from spraying out from the end of the hose.
It is designed with 3/4″ garden hose threads and NH threads.
MICTUNING Upgraded Water Pressure Regulator with 0-160PSI Gauge
The CARBO test gauge is 2-1/2″ across the face and provides an accurate result range of 0-200 psi.
It has a brass connection, a red pointer with a brass nob, and a psi/bar with kpa guidance.
The gauge has a black plastic case with no corrosion in the outside environment and internal brass and copper alloy parts for superior quality.
It has a 3/4” female hose thread adapter that quickly attaches to the outside faucet or hose.
The pressure gauge provides accurate water pressure readings from 0 to 230 psi.
It is applicable to check your house pressure, which helps your shower valves, water filtration system, and irrigation system.
The kit comes with Teflon tape about 300 inches long, a 3/4 GHT Female Hose Connector, and a 3/4 to 1/2 Spigot Adapter.
PLG Quick Connect/Disconnect Kit-2 in. w/Oil, 0 psi to 230 psi, Push-Lock 3/4″ GHT Hose Connector, 3/4″ to 1/2″ Spigot Adapters
Eastman 45169 measures 2-1/2 inches across the face to provide a larger view during use.
It is constructed of heavy-duty steel and has a shatter-resistant lens.
The gauge provides a reading of up to 300 psi and is equipped with a 3/4 inch brass garden hose connection.
A measureman is used for measuring pressure in the irrigation system and house.
This gauge is 2-1/2″ in dial size and has a 3/4” female hose thread adapter attached directly to the faucet or hose.
It provides a reading from 0-200 psi.
The gauge is made of a black steel case, copper alloy, and brass wetted parts.
More Measureman
Measureman 2″ Well Pump Pressure Gauge, 0-100psi/bar, 1/4″NPT Male with 1/2″NPT Adaptor, 3-2-3% Accuracy
Measureman 2-1/2″ Test Gauge, 3/4″ Female Hose Thread, 0-200 psi/kpa with Maximum Pressure Memory
Measureman 3-1/8″ Dial Size, Digital Pressure Gauge, 0-10000psi/bar/Mpa, 1/4″NPT Lower Mount, 0.25% Accuracy
LDR 020 9645 is a 3/4-inch that measures pressure at a range of 200.
Winters PET Series Steel Dual Scale Maximum Pointer Water Test Pressure Gauge with Polycarbonate Lens, 0-160 psi/kpa, 2-1/2″ Dial Display, +/-3-2-3% Accuracy, 3/4″ Female Swivel Hose Connection.
Water pressure gauge 1/4
- Connection: 1/4" NPT
- Pressure range: 0-60 psi
- Material: Stainless Steel Case and Brass
More DuraChoice
DuraChoice 2-1/2" Liquid Filled Pressure Gauges-Stainless Steel Case, Brass, 1/4" NPT, Center Back Mount Connection, 0-100 PSI
DuraChoice 2" Dial Utility Water, Oil, Gas, 1/4" NPT Center Back Mount, Black Steel Case, 0-160 PSI
DuraChoice 2" Oil Filled Vacuum Pressure Gauge-Stainless Steel Case, Brass, 1/4" NPT, Lower Mount Connection, 30HG/60PSI
DuraChoice 1-1/2" Oil Filled Vacuum Pressure Gauge-Stainless Steel Case, Brass, 1/8" NPT, Lower Mount Connection, 0-30HG/0PSI
SuperPro 80960BU monitors pressure at a range of 0-60 psi.
It comes with a 1/2" NPT BRASS bottom mount with a 1/4 inch pipe thread and a 2" Dial Face.
Aquatix Pro Pool Provides Accurate Readings of Filter Pressure Pump from 0 to 60 PSI.
It is made of strong brass fittings for endurance and rugged conditions.
With a 2" dial and a bottom mount of 1/4", this gauge is easy to install and works with most major brands.
For use in swimming pools, spas, hot tubs, aquariums, and other water systems.
The Renator M11-0504T gauge body is made from rust-free stainless steel and filled with glycerine oil to protect the internal components of the gauge from friction and bumps.
This gauge is ideal for use on RVs, swimming pools, spas, hot tubs, aquariums, and any other water system.
It provides an accurate reading of up to 160 psi.
The gauge has a 1/4" NPT Male Pipe Thread and a diameter of 2.5 inches.
The Parts2O TC2104 measures pressure from 0 to 100 psi.
It has a 1/4-inch NPT connection size.
It monitors water pressure and well pumps performance.
This gauge is made from brass fittings, plastic housing, and plastic lens.
SharkBite 24438 Brass Push-to-Connect Tee with Water Pressure Gauge- 3/4"
The Express has a maximum working pressure of 160 psi.
best at determining the incoming pressure of the reverse osmosis system.
The package has a female adapter and a 1/4-inch quick-connect stem.
It is made of BPA-free plastic and has lead-free connections.
It has a pressure range of 0–220 psi.
It is connected to the inlet of the RO membrane.
The fittings feature 1/4-inch quick connect fittings. The connector material is PE, and the gauge material is stainless steel.
Supply Giant S1523-1 pressure gauge, 100 PSI, black
