Resin beads need to be cleaned after the accumulation of dirt, sediments, iron, and other contaminants and this is only done using water softener cleaner.
What makes resin beads dirty?
The whole process of water softening occurs inside the resin beads, but they only remove hardness in your water.
In case your water has iron, manganese, silt, metal particles and organic compounds the resin beads do not remove them in the water.
Over time if you do not install the water filter before the softener system, the contaminants and metal will enter resin tank coating the resin beads, therefore, causing the failure or inefficiencies.
In such incidences, the resin beads need to be cleaned to restore and peak its efficiency.
Comparison table of the Water softener resin cleaner
The accumulation of iron, manganese, silt, metal particles and organic compounds on the resin is called resin fouling.
How do you know your resin beads need to be cleaned?
Two conditions cause resin fouled or coating. These include:
- The resin bead is fouled or coated with manganese and iron
- The resin bead become fouled with organic compounds
It is tough to inspect the resin and tell it visually is organic fouled or iron, and manganese fouled. The best method to determine is to use cleaning reagents such as hydrochloric acid, sulfamic acid, sodium hydrosulfite, citric acid, and acetic acid. The choice of the product depends on the material of construction of the softener’s shell and internal distributors.
Soak a small sample of resin in the hydrochloric acid solution for five to ten minutes. If the hydrochloric acid solution has more than 5ppm of iron, then the resin needs to be cleaned.
Also if you notice your softened water is red staining the sink, bathtubs, showers, and toilets the resin already coated with iron and manganese requires to be cleaned.
Iron and manganese you will find in water contact with certain rocks, humanmade material such as iron and steel pipes. Groundwater and old home that have galvanized iron water pipes and fixtures have a level of iron.
Another case is when your water has tea like the color it indicates it is organically fouled.
Organically fouled resin is not common in tap water it occurs in a home that uses well water.
Organic compounds are a by-product from decomposed plant material. They cause water supply has an odor, bad taste, and color. That’s why you hear people complain about my water softener smell bed.
When they coat the resin beads your water has tea-like color and needs to be cleaned. Cleaning organically fouled resin beads is different from iron and manganese fouled resin.
Read everything you need to know How-to-clean-water-softener-resin whether organically or iron fouled.
How do you feed water softener resin cleaner in the system?
This is a common question that so many people ask where and how to use or feed water softener cleaner.
The water softener cleaner is added into the brine solution while the salt content is low. Follow the package instruction to know the recommended amount of resin cleaner required to add in the resin tank. The most typical right dose is 1 pint to 50 gallons of brine but refers to your package instruction.
Types of water softener cleaner
There are two types of water softener cleaner.
Review of the best water softener cleaner
The whirlpool water softener cleanser help removes the harmful deposit from your water softener resin bed, valve, and system.
Use of this product will help water softener peak efficiency, performance and extend the warranty of any new whirlpool water softener purchase from one to ten years full parts and labor. Meaning you get an extra year if you use Whirlpool water softener cleaner and keep receipts.
It is recommended use after every four months.
The Kenmore 3442707 Water Softener Cleaner is used to remove iron and rust from the resin bed.
For easy use follow the instruction included with cleaner.
It is compatible with Kenmore, Kenmore elite and other models.
The Ecopure water softener cleaner removes iron, sediment, rust and dirt from water softener resin beds.
It is designed to use in any brand of water softener including EcoPure, Whirlpool, Omni, Culligan, GE, Kenmore, Morton, and numerous others.
This product is recommended to use after every four months.
Use of Ecopure water softener cleaner help extend your Ecopure water softener parts and labor warranty up to five years keep your proof of purchase, help maintain water softener peak performance and efficiency.
The Ecopure have made work easy it is not like any other product where you have to mix and measure the powder. This product is different pour content of one bottle into brine well and regenerate.
For those people who forget when to clean your resin bed texts Ecopure to 444999 to sign up for cleanser use reminders.
Morton MWSC Universal Water Softener Cleanser helps remove harmful deposit from resin bed, valve and water softener system that salt alone cannot remove.
This products iron, sediment, dirt, and rust from your water softeners resin bed.
It is designed to use any brand such as Morton, Whirlpool, EcoPure, Omni, Culligan, GE, Kenmore, and many others.
The product is recommended to use after every four months that is three times a month.
Making use of Morton MWSC Universal Water Softener Cleanser help extend your water softener parts and labor warranty up to five years keep your proof of purchase.
The magnetic water technology resin restorer and cleaner help rejuvenate fouled and dirty resin making your softener work.
If you can open a bottle you can use this water softener cleaner yourself, no tools needed or professional experience. You need to pour ¼ bottles and run regeneration.
Every water softener needs this product after every two to three months to clean the resin beads.
It can clean water softener that has brine tank which most of the brand have.
How a water softener resin cleaner works
Water softener resin works on simple principals. Once you add the cleaner in the tank, they drop the resin column making the iron soluble.
Some resin cleaner changes the ferric form of iron making it more soluble.
In other cases, the resin cleaner reacts with iron to form a complex compound that is not attractive to resin beads.
Water softener resin life
Resins are supposed to last 20 years if well taken care of.
How to put resin cleaner in a water softener brine tank
Related water softener articles:
- Buyers guide water softener
- Salt-free water softener
- Water softener salt
- Water softener parts
- Water hardness test kit
- Water conditioner
- How to test water hardness at home
- Types of water softener
- Water softener installation
- How a water softener works
- How much is a water softener
- How to maintain an ion exchange water softener
- Type of water softener resin
- Turn off the water softener
- The benefit of a water softener
- How to program a water softener
- Water softener resin replacement
- Effects of hard water
- Portable water softener
- Signs your house need a water softener
- Best water softener for well water
- Genesis water softener
- GE water softener
- Fleck Water softener
- Pelican water softener reviews
- Whirlpool water softener reviews
- Morton water softener reviews
- Water boss softeners reviews
- Nuvo water softener reviews
- Kinetico water softener reviews
- Kenmore water softener